SWS (Seneye Web Server) Instructions (English)

    Table of contents
    You are currently comparing two old versions - only when you are comparing against the latest version can you revert. Return to version archive.

    Combined revision comparison

    Comparing version 08:53, 11 Aug 2022 by seneye_support with version 13:14, 7 Jun 2023 by seneye_support.

    ...

    Stage 5 - Connecting and updating your Seneye USB Device

    ...

    You must connect the SUD directly to the SWS and not use any form of extension leads as the SUD will not communicate correctly. If the SWS has detected that the firmware is out of date, it will put the SUD in boot load mode, and the SUD tile on the GUI will tell you to keep your device connected.

      Do not disconnect your SUD from the SWS until the tile shows the image below and the LEDs on the front of the SWS are still circling. Once the tile above is shown and the lights have stopped circling, disconnect the SUD from the SWS and reconnect it to complete the update. You will be able to see the update has been successful because the lights will illuminate. If the device is out of water, the lights on the front will flash as shown below:   Please make sure you keep your SWS in a dry place, away from water and humidity. If you are unable to do this, please purchase our DRI box. 

    ...

    [MISSING: System.API.page-diff-other-changes]

    1. /body/p[67]/em/@style: [MISSING: System.API.page-diff-nothing] ⇒ "color: rgb(51, 51, 51); font-size: 20px;"

    Version from 08:53, 11 Aug 2022

    This revision modified by seneye_support (Ban)

    ...

    Stage 5 - Connecting and updating your Seneye USB Device

    ...

    You must connect the SUD directly to the SWS and not use any form of extension leads as the SUD will not communicate correctly.

    If the SWS has detected that the firmware is out of date, it will put the SUD in boot load mode, and the SUD tile on the GUI will tell you to keep your device connected.

    ...

    Do not disconnect your SUD from the SWS until the tile shows the image below and the LEDs on the front of the SWS are still circling.

    ...

    Once the tile above is shown and the lights have stopped circling, disconnect the SUD from the SWS and reconnect it to complete the update.

    You will be able to see the update has been successful because the lights will illuminate. If the device is out of water, the lights on the front will flash as shown below:

    ...

    Version as of 13:14, 7 Jun 2023

    This revision modified by seneye_support (Ban)

    ...