SWS Graphic User Interface (GUI)

    Version as of 03:10, 27 Nov 2024

    to this version.

    Return to Version archive.

    View current version

    The Graphic User Interface (GUI) for your seneye is visable to any PC or Tablet on your LAN that has an HTML 5 supported browser. PC's or Tablets that are not on your LAN (ie connected by 3G) will not be visible. 

    To find your GUI you will need to use that link that was provided when you first registered your SWS to your account. If you do not have this then you will need to add the address to a browser manually. The URL is unique so your SWS and the part that is marked with **** on the address below needs to be replaced with the ID code that was on the label on the front of your SWS.

     

    An example is given below to show the format

    "http ://2mop534r4o6l.sws.li"

     

    Overview

    The layout of the GUI is shown below.

    SWS GUI overall image.png

    The readings from the SUD are shown on an individual 'Tiles'.

    If you hover your mouse pointer the tile will rotate to show more options. There is a help link in the top right-hand corner of the tiles that allow you to link to an answers page for more information 

    Each tile can be moved by clicking on the bottom bar and dragging it to a new location. The other tiles will automatically re-stack in a new location.

     

    Light meter readings

    You can get a more in-depth view of the output from the light meter on the SWS GUI by clicking and holding the "save light" tile. This opens the page as shown below. There is some more information regarding the interpretation of the light readings on these pages. The "top", "middle", "bottom" and "free" buttons can be used to save light readings at specific locations. These are then visible on your seneye.me dashboard.

     

    SWS_GUI_lightmeter.png

    Adjusting Trim

    You can adjust the output for individual parameters from the SUD by clicking for a short time on the SUD settings tile. This will bring up the menu below.

    Clicking on SUD Settings.png

     

    SUD settings page.png

    This allows you to make minor adjustments for each individual reading by using the blue sliders. The reading + the trimed value is shown on the right hand side. 

    Marine tick box

    The 'Marine Tank' tick box (shown by the red arrow on the image above) needs to be set if you are using the seneye in a salt water aquarium. If you do not tick this, the pH reading will report high.

    Turning off warning lights

    You can use the green ticks, shown on the right hand side of the display, to control the individual lights on the SUD. If you click on the tick, it will turn in to a cross and the light will be off all the time.

    Click save, to complete the changes.