SWS Manual Fimware Update

Version as of 10:07, 3 May 2024

Return to Version archive.

Remove all cables from the SWS.

Remove the top of the SWS by unclipping the two push-in clips on the sides of the SWS.

Once the top is removed you will be able to see the inside.

Format a USB memory stick (ideally 8GB or smaller) to "FAT32"

If you are using a MAC click here for instructions

Download the SWS firmware from here

Copy the firmware onto the memory stick

The file on the USB stick needs to be called "firmware.sws" (if windows hide the file extension only "firmware")

ex. firmware (1).sws or firmware (1) will not work

Locate the small reset button recessed next to port D, and keep pushing it down while connecting the power cable/switching the power on to the SWS.

The light sequence will change to this:

Then insert the USB stick with the firmware loaded into the SWS

The light sequence will then change whilst the firmware is loading

When the firmware is loaded the power light will remain on constantly

To reassemble your SWS, push the two components back together gently. The clips on each side should reseat into the holes.

Reconnect any cables that you have disconnected