reducing ammonia NH3 levels

We know high levels of NH3 (ammonia) is harmful to fish in the aquarium or pond but reducing them can often be a problem.

All aquariums should have a biological and or chemical filtration to control ammonia. Biological filtration uses bacteria colonies to convert ammonia to less harmful substances. Chemical filters remove the ammonia and lock it away, common materials are zeolite. If you see sudden spikes without a change in stocking or feeding levels than it is likely that either of these methods has failed allowing ammonia to rise to unacceptable levels; a chemical additive or water changes is a good ways to reduce free ammonia levels.

The root cause of high NH3 it can vary but usually it is worth checking the following:

1. make sure you are not over stocking or stocking too qucikly. Also see New tank syndrome.
2. make sure you are not overfeeding.
3. make sure that a fish has not died in the pond or aquarium.
4. make sure that your filtration is working correctly and not too small
5. ensure that water used for changes has a similar pH, else  NH3 may be converted from NH4 with a pH increase.
6. filters may have been over cleaned and the beneficial bacteria colonies killed or removed.

Here are a few common ways to remove or control ammonia:

1. water changes - this is by far the fastest and most reliable method but care should be taken, click here to find out why.
2. ammonia removing chemicals - there are many ammonia removers on the market but they are no magic cure. You have ammonia because somthing is wrong, using chemicals is not a long term solution.
3. increasing biological filtration - this may take longer than the other above so may need to be used in conjunction with them. Usually it involves adding more filtration, especially with a high flow and media with a large surface area for bacteria to colonise. Another way is encourage bacteria to colonise much more rapidally a few tips can be found here.