Leak Detector Setup Instructions

    Table of contents
    1. 1. Notes for Beta Testers.
      1. 1.1. Please read Carefully.
          1. 1.1.1.1. The seneye team,
          2. 1.1.1.2. X

    Version as of 15:44, 27 Apr 2024

    to this version.

    Return to Version archive.

    View current version

    Notes for Beta Testers.

    Please read Carefully.

    Please report all bugs to [email protected]

    Once you receive your Leak Detector, the first thing that needs to be done is to upgrade the firmware on your Seneye Web Server. To do this, please send an email to [email protected] letting us know that you have a Leak Detector.

    Once you have received an email back from us confirming that the firmware on your SWS has been updated, please check the GUI to ensure that you have a 'Leak Detector' tile. You will only be able to view your SWS's GUI from a device that is on the same network as your SWS. For instructions on finding the GUI, please click here.

    Once you have confirmed that your SWS's firmware has been updated, it's time to connect your Leak Detector. To do this, you will need to take the back off of your SWS by pressing in the clips on either side:

     

    The seneye team,
    X