Table of contents
    [MISSING: System.API.no-headers]

    Version as of 00:36, 27 Sep 2020

    to this version.

    Return to Version archive.

    View current version

     

    You SWS is designed to fail save in the event of a failure to update the firmware correctly. Whilst this is a very rare occurrence, it is designed to do this so the device can be easily recovered. 

     

    If your device is in boot-load mode then the lights will be flashing in the sequence:

    To recover your device from this state, please follow the instructions below:

     

     

    Remove the seneye device from your SWS

    Format a USB memory stick (ideally 8GB or smaller) to "FAT32

    If you are using a MAC click here for instructions

    Download the SWS firmware from here

    Copy the firmware onto the memory stick

    Insert the stick into the USB socket on the SWS

    The light sequence will then change whilst the firmware is loading

     

    When the firmware is loaded the power light will remain on constantly

    Reconnect any cables that you have disconnected