Recovering your SWS from bootload mode
Table of contents
[MISSING: System.API.no-headers]
You SWS is designed to fail save in the event of a failure to update the firmware correctly. Whilst this is a very rare occourence, it is designed to do this so the device can be easily recovered.
If your device is in bootload mode then the lights will be flashing in the sequence:
To recover your device from this state please follow the instructions below:
Remove the seneye device from your SWS
Format a USB memory stick to "FAT32"
Download the SWS firmware from here
Copy the firmware onto the memory stick
Insert the stick into the USB socket on the SWS
The light sequence will then change whilst the firmware is loading
When the firmware is loaded the power light will remain on constantly
Reconnect any cables that you have disconnected