Leak detector Instructions Stage 07
Table of contents
- 1. 3. Testing your Leak Detector
- 2. With your Leak Detector connected, you can power up your SWS again and you should see the lights on the front start circling to show that it is booting up. When the SWS has finished booting up and the lights are more stable, add a drop of water to the golden surface of the Leak Detector and check whether you receive an alert. Please also check on your Web Server's GUI and your seneye.me dashboard to see if they register the alert, though your dashboard may take a longer time to update.
3. Testing your Leak Detector
With your Leak Detector connected, you can power up your SWS again and you should see the lights on the front start circling to show that it is booting up. When the SWS has finished booting up and the lights are more stable, add a drop of water to the golden surface of the Leak Detector and check whether you receive an alert. Please also check on your Web Server's GUI and your seneye.me dashboard to see if they register the alert, though your dashboard may take a longer time to update.
After you have tested the Leak Detector please ensure that you wipe off any residual moisture, especially if testing with salt water, in order to preserve the device's sensitivity.