Version as of 15:08, 28 Mar 2024

    to this version.

    Return to Version archive.

    View current version

    single slide blister pack small.png

    Installing and activating your seneye+  slide by its number can be done in two ways which are described below. Both methods will require the slide code that is located on the sticker fitted to the slide packaging. This number is important to ensure that the right algorithms are downloaded for that specifc slide. A slide code can only be activated once. A common problem is not entering the slide number correctly.

    seneye+ slide showing serial number.png

    Please ensure the slide is fully soaked and handled correctly to avoid problems.

    The first step is you will need a new slide. If you require new slides please click here or visit your local fish store

    If you are using a SWS, method 1 is the only way to register your slide

    Method 1 - Registering your slide on seneye.me

    Please log on to www.seneye.me using your E-mail address and password. 

    Please click on the name of your device to take you to the 2nd page of the dashboard

    Here you will find a replace slide widget - click on replace slide and enter the slide code.

    If you cannot find the slide activation widget, or the slide code is not recognised, please E-mail [email protected]

     

    seneye.me slidge registration 2.png

    Method 2 - Registering your slide with the SCA

    If your seneye device is connected to the PC you can register the slide using the seneye connect software (SCA)

    Please open the SCA, click on the 'replace slide' tab, followed by the 'activate slide' button at the bottom. 

    A pop up window will apear where you can enter the slide code.

    Slide registration on SCA.png

    If you have any problems with this, please try method 1. If this does not work please contact us.