Fitting and registering your seneye slide
Table of contents
Activating a slide
Installing and activating your seneye+ slide by its number can be done in two ways which are described below. Both methods will require the slide code that is located on the sticker fitted to the slide packaging. This number is important to ensure that the right algorithms are downloaded for that specifc slide. A slide code can only be activated once. A common problem is not entering the slide number correctly.
Please ensure the slide is fully soaked and handled correctly to avoid problems.
The first step is you will need a new slide. If you require new slides please click here or visit your local fish store
If you are using a SWS, method 1 is the only way to register your slide
Method 1 - Registering your slide on seneye.me
Please log on to your account http://go.seneye.com/login using your E-mail address and password.
Please click on the name of your device to take you to the 2nd page of the dashboard
Here you will find a replace slide widget - click on replace slide and enter the slide code.
If you cannot find the slide activation widget, or the slide code is not recognised, please E-mail [email protected]
Method 2 - Registering your slide with the SCA
Please note you need to be running SCA V1.40 (beta) or higher. You can download V1.40 beta here.
If your seneye device is connected to the PC you can register the slide using the seneye connect software (SCA)
Please open the SCA, click on the 'replace slide' tab, followed by the 'activate slide' button at the bottom.
A pop up window will apear where you can enter the slide code.
If you have any problems with this, please try method 1. If this does not work please contact us at [email protected]