Table of contents
    [MISSING: System.API.no-headers]

    Version as of 17:31, 28 Mar 2024

    to this version.

    Return to Version archive.

    View current version


    The seneye+ slide needs to be handled and fitted correctly to the seneye device to avoid damage or false readings.

    Each slide has two sensor pads the one which is uncoated is NH3 and the pad with the white coating on its PH.

    Touching the NH3 pad will cause it to pick up grease from your fingers and read high care should be taken when fitting the slide. You can visually examine your slide to see if its damaged. Always pick up the slide by the sides.

    slide small.png

    Your seneye+  slide pack will come in a cardboard slip where 3 seperatly packaged slides are. They are in moisture proof plastic continer with a plastic label to seal it. Please store your slide pack away from light, heat and moisture else its one year shelf life may be reduced.

     

    new slide blister pack small.png

     

    new slide blister pack small peal.png

    new slide blister pack small open.png

     

    For information on fitting your seneye+ slide please click on the image below.

    The following link will show a video on how to fit a seneye slide slide video vimeo.png

     

    TIP: to avoid problems ensure the slide is fully wetted fitted in a way that ensures air is not trapped between the slide and the reader, ideally under water.