Version as of 00:43, 24 Jun 2021

    to this version.

    Return to Version archive.

    View current version


    The seneye connect application (SCA) gives you a live read out from your light meter a seneye reef device.

    This powerful tool can be used to help you understand the light levels in your aquarium giving you an output of PAR, LUX, KELVIN and a Calculation of PUR. To access you light meter output please follow the instructions below:


    1. Click on one of the light meter output tiles on the SCA


    SCA light meter 01.png

    If you cannot see the SCA, it may be in the system tray on your PC. Click here to find out how to check.

    This will open the detailed page for the light meter output which is shown below:

    SCA light meter 02.png

    The values for PAR, LUX and Kelvin & PUR are shown along the top of the screen.  If you are not getting a Kelvin reading and want to know why click here.

    The graph on the left gives you an indication of the spectral output from your lighting.

    The graph on the right shows the Kelvin output of the lighting, a kelvin is any point on the black line. If the colour is not a kelvin, the the point is now shown.

    The "Top", "Middle", "Bottom" & "Free" buttons allow you to save light readings which are then uploaded to


    2. Move the seneye device around the aquarium to read different light levels

    The seneye light meter sensor is located on the back of the seneye device in the round window. To read the light levels in your aquarium this will need to be positioned at the point where you want to take the reading. The reading on the SCA will update in real-time so you can get an idea of the different light levels in your aquarium and see how position and depth affect the output. A guide to the output can be found here for freshwater & here for marine.

    seneye reef showing back on wire small.png