Version as of 04:51, 29 Mar 2024

    to this version.

    Return to Version archive.

    View current version

     

    How to set up the Edimax Wi-fi Module 

    Wi-Fi

    Recommended product:

    Edimax N300 Universal Wi-Fi Extender 

    L.E.D. light modes

    edimax wifi plug.PNG

    edimax wifi led table 1.PNG

    edimax wifi led table 2.PNG

    Instructions

    Before you start:

    • If you haven't finished setting up your SWS please do this before setting up the edimax 
    • Do not connect anything to the Edimax Ethernet port during setup it will prevent the final step of setup.
    • Please have your wi-fi password at hand. 

    1) Plug the Edimax into a power socket with nothing attached to its Ethernet port. Press and hold the WPS button for over 15     seconds until the power light starts to flash.

    2) On a phone or PC go to your wi-fi network settings. Join the network called “EdimaxEXT.Setup XX”. If the option to join the edimax network is not there then repeat step 1.

    3) Open a web browser "edimaxext.setup/" into the address bar (not search bar). This will take you to the setup page.

    4) Press the get started button shown in blue.

     

    5) Select bridge mode 

    6) Select the router you want to connect to

     

    7) Enter the password for your Wi-Fi network and press next. Remember the password will be case sensitive.

     

    A connection test in now performed.

    If you get the password wrong you will get this screen - DO NOT APPLY IT - go back and enter the password again.

    8) If the set up is successful it will look like below and have a green tick. You can then press apply.

     

    You will see the congratulations screen.

     

     

    Now you can disconnect the seneye web server from your router and connect it to up to the Edimax as shown in the bottom of the two images.

    SWS wi-fi and ethernet wiring diagram.png

    The full user manual for the E

    dimax EW-7438RPn V2 is available here.

    Ethernet Over Power (E.O.P.)

    Recommended product (click to buy UK plug out):

    Edimax - Ethernet Over Power Pro kit

    Edimax - Ethernet Over Power Starter Kit

     

    Edimax HP-5102ACK

    L.E.D. light modes

     

    edimax eop plug.PNG

    edimax eop led table 1.PNG

     

    The full user manual for the Edimax HP-5102ACK is available here.