Seneye USB device instructions for PC use
Table of contents
[MISSING: System.API.no-headers]your seneye
To start using your seneye device you will need to connect it to the internet this can be achieved in two ways.
Teh first is the
PC with a wired or wireless network and TCP/IP protocol,
Windows XP, Vista 32-/64-bit, Windows 7 32-/64bit, & Windows 8 32-/64bit.
Full speed USB 1.0 port
Minimum 1Ghz processor and 128mb RAM
Internet browser: Internet Explorer 8.0+, Firefox 4.0+ & Chrome.
Internet connection (for setup and online use)
24
seneye and the environment
seneye is committed to reducing its impact on the environment by producing high quality and
robust products that last for many years.
PACKAGING
When disposing of this product’s packaging, please ensure that it’s recycled.
SENEYE DEVICE RECYCLING
Do not dispose of your seneye product with your domestic rubbish at the end of its useful life.
The seneye device contains a battery which must be disposed of in the correct manner. This
product contains materials which, when processed correctly, can be recovered and recycled.
You can take this product to your local recycling centre. Your local municipal authority can
advise you of the collection facilities available for electronic waste products in your area.
Alternatively you may return your seneye device to seneye ltd for safe disposal.
safety
WARNINGS AND CONDITIONS
Do not attempt to repair your seneye device. Please contact [email protected]
Make sure that all electrical connections are properly made.
Do not connect your seneye device to the USB Power Adaptor accessory (optional) until you have
properly connected any other leads.
Your seneye device is intended for underwater use. Do not leave your seneye device connected to
a power supply and left for long periods out of water. Doing so may result in damage to the slide.
Do not place your seneye device on, or directly next to, your aquarium heater. This placement will
give incorrect readings and may cause damage.
The maximum water temperature should not exceed 50
o
C.
Ensure that the drip protector is located at the lowest point on the cable.
If the USB connector becomes wet do not insert into your PC USB port until completely dry.
Do not look directly as the sensor readers underneath the back cover.
LED’s are very bright